F62 PRIMER Z

Description

F62 PRIMER Z primer suitable for preparing galvanised surfaces for the application of F62 PAINT S, F62 PAINT S-PLUS and F62 PAINT intumescent paints.

From the technical data sheet

Characteristics

Primer in water dispersion, used for the preparation of substrates in galvanised sheet metal, galvanised metal structures and pre-painted sheet metal. It ensures the adhesion of F62 PAINT S, F62 PAINT S-PLUS and F62 PAINT on metal surfaces that do not require anti-corrosion protection.

Composition

APEO-free product formulated with acrylic resins in water dispersion and selected fillers.

Use

Intumescent paints must be applied after at least 4 hours.

Tools

Brush, Roller, Spray

Warnings

The specification data were determined at +23°C with an ambient relative humidity of 65%. Under different conditions, the data and the times between one operation and the next are subject to variation. The technical information provided is indicative only. Owing to the enormous variety of substrates and application conditions, it is advisable to check the suitability of the product for its intended use and its effectiveness by means of tests carried out on the specific installation. F62 PRIMER Z Colour colourless Density 1020 - 1120 g/l Water vapour diffusion good Adhesion to building substrates excellent Dry residue by weight 28 - 32% Dilution 1:1 / 1:2 by vol. with water Coverage 9 m2/l (Dilution 1:1) 13 m2/l (Dilution 1:2) Application temperature +5 / +30°C Drying 5 ÷ 8 hours Tool cleaning wash with water Storage: in sealed containers: 12 months temperature: +5 / +30°C 15 kg tub Elmo s.r.l. - via L. Galvani, 2 - 31027 Spresiano (TV) - Italy - Tel. +39 0422 892564 - info@elmosrl.eu - www.elmosrl.eu